• Steel Fabrication: 3 Desulfurization Methods To Consider

    When steel is being fabricated, sulfur may bind to the steel. Generally speaking, sulfur is not a desirable alloy that is added with steel, and it is considered to be an impurity instead. This is because sulfur causes brittleness and reduces weldability of steel if it exceeds 0.05%. As a result, desulfurization is an important step in many steel fabrication processes. This article will look at 3 common desulfurization methods. [Read More]

  • 2 Tips for Making the Steel Caster Wheels in Your Factory Last Longer

    If you work in a factory that uses movable equipment, some of the machinery may be placed on steel caster wheels. Keeping the wheels maintained is important for safely moving the equipment as well as making the wheels last longer. Use the tips below to keep them in tip-top shape for as long as possible. Keep the Wheels Out of Water If your caster wheels are made out of steel, it is imperative that you limit their exposure to water. [Read More]

  • Make Sure Your Overhead Crane Hoist Will Last For Years By Protecting It From Heat

    Overhead crane hoists are sizeable investments for factories. Therefore, it's important to make sure they're well taken care of and will last for years. Most overhead crane hoists are built to withstand the workloads they'll see in factories, but not all hoists are made to withstand high temperatures. If you're looking for an overhead crane hoist, and there is a significant heat source in your factory, make sure you have a way to protect an overhead crane hoist from heat before purchasing one. [Read More]

  • Investing In Aluminum: The Metal Of The Future

    You might not think of recycling as a great economic market for your investments or your involvement, but there you would be wrong. Scrap metal recycling, especially recycling aluminum, is one of the most effective and useful forms of recycling, and it's an industry that will only keep growing as demand for aluminum continues to increase. Here are a few ways you can get on board the money train of aluminum recycling and why it's a great investment. [Read More]

  • 5 Features to Look for in Conveyor Chain Cleaning Brushes

    Running large-scale conveyor belts is the best way to keep practically any kind of material moving steadily across the plant floor, but those big belts or buckets can't move without the chains to pull them. Keep the chains cleaner with less work by investing in the right set of cleaning brushes with all five of these must-have features. Direct Drive Motors Basic brush equipment is passive, only spinning as the chain runs through the two or four sets of bristles. [Read More]

  • 4 Tips To Have A Successful Home Demolition And Renovation

    Demolition and renovation of your home's interior can be stressful, especially when you are living in your home while the work is being completed. You want to make sure the work is completed on time so you can get back to your normal life as soon as possible. Because there are already a lot of problems that can arise in home construction work, you should do all you can to prevent potential problems. [Read More]

  • Tips For Sharing A Storage Unit With Another Person

    Sharing a storage unit with another person is a great way to save money, especially if you don't have a lot of items to store. Like sharing a room with your sibling or an apartment with a friend, things can quickly go sideways if you don't take time to properly prepare and set some ground rules. Here are a few things you should do to ensure your joint venture is a success. [Read More]

  • Tips For Choosing A Good Welder For Your Classic Car Rebuild

    If you're restoring an old car and want to do the body work yourself, you may find that you need a welder for the sheet metal work. To ensure a quality weld and a restoration that will stand up to the tests of time, you'll need to be selective about your welder and the work. For most automotive work, a wire-feed welder is sufficient, and it's easier to use if you're just starting out. [Read More]

  • Fixed Or Flexible: PLC Options You Should Consider For Your System Automation

    Programmable logic controllers date back to the late 1960s. Now, they are used to automate systems of all kinds, from traffic lights to theme park rides. In fact, you probably interact with things that depend on Eaton PLCs every day without even realizing it. They play a vital role in technology management and automation, keeping key components of society operating on a predetermined schedule. There are two primary types of PLCs. [Read More]

  • Protect Your Water Tanks From Freezing: Know The Dangers And How To Manage Sub-Freezing Conditions

    If your facility utilizes steel tanks to store filtered water, then you should recognize the dangers posed by freezing temperatures. Unfiltered water can freeze, of course, but filtered water actually makes the problem more acute by removing impurities that can inhibit freezing. Below is more information on the damage that can be done by frozen water tanks and how to prevent them from freezing in the first place: How frozen water can damage your tanks [Read More]